Well, it’s been a long time in the planning, but I finally have a new bike for touring! This time with off-road touring in mind, as well as winter biking, and all year commuting (as it will be replacing my beloved Surly Long Haul Trucker). Behold, the Surly Karate Monkey! (Please forgive the dodgy phone pictures for now, I hope to get out with a proper camera on a sunny day some time soon. When the sun returns. One day. Right now it’s just snowing and snowing and snowing.)
The Rohloff Hub
The stock build of the Karate Monkey is a single speed. After a lot of umm-ing and ahh-ing, I deciding that trying to pick one gear to ride in the valley would just be too annoying – especially as I would need to be towing heavy toddlers around with it. So it would need gears. Then there was a lot more umm-ing and ahh-ing, and I finally decided to use an internally geared hub rather than the standard derailleur setup.
After reading a lot of prolonged internet arguments, and getting a few in-person opinions about the Rohloff hub (they’re awful! they’re fantastic!), I thought one might suit me, and I may as well give it a go myself. After hunting around on the internet, I sent off an email to Cycle Monkey in California. They are fantastically helpful, and it was an easy decision to have them build up a wheel for me. This took no time at all, and so last weekend with wheel in hand a morning was spent assembling the bike, and ta-dah, the Rohloff Monkey was let loose on the world!
The Karate Monkey – Rohloff Hub build isn’t one I’ve seen very often, definitely less frequently than some of the other Surly bikes. I can’t really give a thorough review until I’ve got a few more thousand kilometres under the saddle, but so far it seems to be awesome. There were no difficulties in getting everything assembled, although there are a few make-do solutions that I might change in the near future. I haven’t been bothered by the low range noise that people mention, although it was nice to be aware of it beforehand(that’s the noise you get in gears 1 – 7, which apparently quietens down after the hub has worn in a little). And it does feel a little like it’s marginally less efficient when climbing, but not so much so that I think it will make a difference to me for my uses.
The hub installed is the:
Speedhub 500/14 TS (threaded spindle, so not quick release) DB (disc brake, for the Karate Monkey’s mechanical disc brakes) OEM black anodized, 32h. The rest of the set up used
Axle plate TS OEM2 long
Monkey bone instead of Speed bone
Magura Rotor 160mm 4-bolt
Currently the cables are held in place with a slightly dodgy cable tie setup. I’ll do something to make this look a little nicer some time soon.
There’s no chain guide used, and no tensioner required. Everything was built up on a No Tubes Flow Rim, as I’m planning to go tubeless in the summer. I do have chain tensioners on at the moment, just because when we were assembling everything, I didn’t want to shorten the chain until I had checked out how the gear range suited me. The smallest chainring that Rohloff says is legal to run with the stock 16T hub sprocket is 34T, but the stock Karate Monkey cog is 33T – Neil from Cycle Monkey said this was close enough that I was unlikely to have any issues. I am fairly light and small compared to a lot of Rohloff riders, that’s for sure. So far the range of gears seems to suit me perfectly though. I’m a bit of a spinner rather than a cranker, and I spend a lot of time riding up long climbs, or towing a toddler around, so having a good low range is perfect. So I might be shortening the chain soon, and removing the tensioners.
Rohloff and Chariot towing
The good news is that it’s easy to insert and setup the Chariot hauling spindle to tow the Chariot. I was a little worried that it wouldn’t be possible, but it’s turned out to be fine. I’m not sure if it will sit quite so neatly once I remove the chain tensioners – so that might require some playing around with to optimise. Hopefully I won’t be towing the Chariot for too much longer anyway though..
Next up…
Now it’s just waiting for some awesome Porcelain Rocket bags, so when we go out bike-packing together I’ll actually be able to carry some gear. And maybe I’ll get a front fork at some point, as I’m not so much of a masochist as to want to ride the single track around here on a fully rigid bike. Maybe eventually I’ll get a new wheel on the front, with another No Flow rim – maybe a dynamo hub? That might just be crazy talk though. And of course, lots of riding.
3 replies on “The Rohloff Monkey”
New bike looks awesome! Have you been able to ride it much since the snow has set in? Are you still enjoying the bike?
It is pretty sweet :) I’ve taken it out in the snow a couple of times – it’s harder though, I usually try and send Alex out first to scout on his fat bike, just to check the trail has been compressed enough for me! And skiing starts to get distracting this time of year too. I’m using it for commuting every day though now… unfortunately the weather has turned, and it will be too warm for biking this week – you can’t bike on the warm snow. It’ll be snowing a whole lot more this weekend, and sitting around -10oC, so maybe after this weekend I’ll have the chance to get out and play some more on trails.
The timing has been kind of unfortunate, it was all built up just as winter began. I’ll have all the bike-packing bags custom made in a few weeks, and then I’ll be even more impatient for nice weather to return. Only another five months or so *sigh*
How did this hold up?? I’m considering doing the same thing